home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Libris Britannia 4
/
science library(b).zip
/
science library(b)
/
PACKET
/
WNOS4DOC.ZIP
/
SETUP.EXE
/
AUTOEXEC.NOS
< prev
next >
Wrap
Text File
|
1992-05-23
|
9KB
|
388 lines
# AUTOEXEC.NOS - WNOS Configuration and startup File
#
# Note that my WNOS 'root' is C:\TCPIP and so configuration files
# are found and sourced from that directory. Things may be different
# in your setup!
#
#----------------------------------------------------------------------
# General Setup Details
#----------------------------------------------------------------------
#
# Screen is Mono so display Status Line accordingly
#
attribute mono
#
# Reboot the machine if free memory drops below 4k
#
mem thresh 8000
mem reboot on
#
# Set interrupt buffer sizes (5 buffers each of 2k)
#
mem ibufs 2048
mem nibuf 5
#
# Set the suffix to be added to hostnames for domain searches
#
domain suffix ampr.org.
#
# Set the local hostname
#
hostname g6dhu.ampr.org
#
# Set MYCALL (used by Mailbox and NET/ROM node)
#
ax25 mycall g6dhu-5
#
# Set the IP address of this machine
#
ip address 44.131.20.3
#
#----------------------------------------------------------------------
# Attach Hardware Ports
#----------------------------------------------------------------------
#
# Attach TNC running KISS on COM2: Serial port speed is 9600bps
# This is to a 2m radio and the interface is called "144".
#
attach asy 0x2f8 3 ax25 144 2048 236 9600
#
# Attach SLIP link running 9600bps (to sys2.g6dhu) on COM1:
# The interface is called "sl0".
#
#attach asy 0x3f8 4 slip sl0 2048 236 9600
#
# Attach Packet driver looking at interrupt 62 (for G8BPQ TheNode)
#
#attach packet 62 slip 5 236
#
# Attach Packet driver looking at interrupt 61 (for G8BPQ TheNode)
#
#attach packet 61 144 5 236
#
# Tell TNC running NORD><LINK The Firmware to switch into KISS mode
#
# Send it CR CR ESC @ K CR CR
#
#param 144 13 13 27 64 75 13 13
#
# Set TNC2-clone into KISS Mode (Tiny-2, PK232 etc)
#
# Send CR CR K I S S O N CR
param 144 13 13 75 73 83 83 32 79 78 13
#
# Send CR CR R E S T A R T CR
param 144 13 13 82 69 83 84 65 82 84 13
#
# Attach DRSI card driven by the SCC controller. The 1200baud port
# is called '650'
#
#attach scc 1 init 300 16 2 0 1 0 7 p4915200 8
#attach scc 0 ax25 650 236 d1200 128
#attach scc 1 ax25 9600 236 d9600 128
#
# Set up the various DRSI card parameters.
#
#param 650 1 18
#param 650 2 40
#param 650 3 3
#param 650 4 2
#param 650 5 0
#param 650 6 1
#param 650 7 9
#param 650 8 7
#param 650 9 3
#param 650 10 120
#
#------------------ End of attach section -----------------------
#
# Set Broadcast Address for direct channel
#
ifconfig 144 broadcast 44.255.255.255
#
#----------------------------------------------------------------------
# TCP, IP and ICMP Parameters
#----------------------------------------------------------------------
#
# Maximum Segment size is 512 bytes
#
tcp mss 512
#
# Window is 1024 bytes (send up to this value before waiting for an ACK)
#
tcp window 1024
#
# Initial Round Trip Time for new connections is 30 seconds
#
tcp irtt 30000
#
# Accept Telnet WILL ECHO
#
echo accept
#
# IP Time To Live is 25 hops
#
ip ttl 25
#
# Respond to ICMP Echo Requests (pings)
#
icmp echo on
#
#----------------------------------------------------------------------
# Startup servers
#----------------------------------------------------------------------
#
start ftp
start ax25
start telnet
start smtp
start finger
start echo
start ttylink
start netrom
start discard
start remote
start convers
start xconvers
start nntp
#
#----------------------------------------------------------------------
# SMTP Parameters
#----------------------------------------------------------------------
#
# Kick out e-mail every 40 or so minutes
#
smtp timer 2500
#
# I am my own gateway (I need to be for BBS mail forwarding purposes)
#
smtp gateway g6dhu.ampr.org
#
# We want to route mail to destinations, not queue it
#
smtp mode route
#
# Only print a message on the console as new mail arrives
#
smtp quiet 1
#
# Always try delivering mail in compressed mode
#
smtp lzw yes
#
#----------------------------------------------------------------------
# AX.25 Parameters
#----------------------------------------------------------------------
#
# Set Auto-routing as the default
#
ax25 digipeat 144 2
#
# Broadcast ID message every quarter of an hour (UK Regs)
#
ax25 bcinterval 900
ax25 bctext "Bath, Avon - TCP/IP Mailbox and Node"
#
# Initial MAXFRAME to use is 7 frames
#
ax25 maxframe 144 7
#
# PACLEN is 256 bytes
#
ax25 paclen 144 256
#
# Retry for 10 times
#
ax25 retry 144 10
#
# Accept 2048 bytes before sending RNR's
#
ax25 window 144 2048
#
# Poll Threshold is 128 bytes
#
ax25 pthresh 144 128
#
# Link Inactivity Timer is 15 minutes
#
ax25 t3 144 900
#
# Link Busy Timer is 200 seconds
#
ax25 t4 144 200
#
# The default channel is the 2m one
#
ax25 route add 144 default
#
#----------------------------------------------------------------------
# Log file location
#----------------------------------------------------------------------
#
log c:/tcpip/net.log
#
#----------------------------------------------------------------------
# NET/ROM Configuration
#----------------------------------------------------------------------
#
attach netrom
netrom user G6DHU
#
# Set our NET/ROM alias
#
netrom interface 144 ip1403 192
#
# Age routes every hour and send a NODES broadcast at the same interval
#
netrom nodetimer 3600
netrom obsotimer 3600
#
# Only broadcast my own route and nobody else's
#
netrom verbose no
#
# Time To Live is 25 hops
#
netrom ttl 25
#
# Accept upto 1024 bytes before Choking the L4 connection
#
netrom qlimit 1024
#
# Any node with a route quality of 1 or greater gets put in the table
#
netrom minq 1
#
# Retry a Level 4 Info frame three times
#
netrom retries 3
#
# Initial Round Trip Time on NET/ROM Level 4 is 120secs
#
netrom irtt 120
#
#----------------------------------------------------------------------
# Load other configuration files (see UK Distribution Pack)
#----------------------------------------------------------------------
#
# NET/ROM Nodefilter Table
#
source /tcpip/nodes.fil
#
# NET/ROM Routing
#
source /tcpip/nodes.inf
#
# ARP Statements
#
source /tcpip/nodes.arp
#
# AX25 Routing Table
#
source /tcpip/nodes.axr
#
# IP Routing Table
#
source /tcpip/nodes.rou
#
# Mode Table
#
source /tcpip/nodes.mod
#
#----------------------------------------------------------------------
# Mailbox sign-on texts
#----------------------------------------------------------------------
#
# General Message Of The Day
#
motd "Hello from G6DHU's TCP/IP System in Bath (Send Control-X to Escape)"
#
# Mailbox Message Of The Day
#
mbox motd "Type C to Chat, ? for Command List, and 'S mike' to mail me"
#
# Do logging of mail activity (to spool/node.log)
#
mbox log yes
#
# Allow paging of mail whilst it is read (on telnet connections)
#
mbox more yes
#
#----------------------------------------------------------------------
# Mail Forwarding Parameters
#----------------------------------------------------------------------
#
thirdparty on
#
# Kick out BBS mail every hour
#
mbox ftimer 3600
#
# Set the location and hierarchical address of this mailbox
#
mbox finfo "Bath, Avon"
mbox fnic "GB7WRW.#41.GBR.EU"
#
#----------------------------------------------------------------------
# Auto Router Save Times
#----------------------------------------------------------------------
#
ax25 route hold 1
ax25 route save 120
route save 115
arp save 110
netrom route save yes
#
#----------------------------------------------------------------------
# Enable swap to disk or EMS/XMS RAM
#----------------------------------------------------------------------
#
swap yes
#
#----------------------------------------------------------------------
# NNTP Setup
#----------------------------------------------------------------------
#
#nntp profile sig c:/tcpip/spool/signatur/g6dhu
#nntp profile reply <g6dhu@g6dhu.ampr.org>
#nntp profile organ "84 Frankland Close, Bath, Avon, BA1 4EL"
#nntp profile user g6dhu
#nntp profile fullname "Michael Chace"
#nntp ihave 1
#
#----------------------------------------------------------------------
# Set up TNC running TheFirmware (or any other) KISS
#----------------------------------------------------------------------
#
# TXdelay = 36 x 10ms
#
param 144 1 36
#
# Persistance = 50/255 (Matches local nodes)
#
param 144 2 50
#
# Slottime = 10 x 10ms (Matches local nodes)
#
param 144 3 10
#
# TXTail = 3 x 10ms
#
param 144 4 3
#
# Set Half Duplex Radio Channel working (most are!)
#
param 144 5 0
#
#----------------------------------------------------------------------
# Tell local NET/ROM nodes that we are on-air
#----------------------------------------------------------------------
#
netrom bcnodes 144
netrom bcnodes 144
netrom bcnodes 144
#
# The END